12/29/2023 0 Comments Double sided vhb tape![]() ![]() This is critical, if the unit is suspended too early the bond strength will not have built up sufficiently and it will fail. 4 Apply pressure to the bond area and leave to dwell for at least ½ hour before the assembly is suspended on the powder coat line.So it is advised to use the thicker versions of the tape for longer sections to be bonded. Both of these will be particularly important at higher temperatures. 3 Be aware of thermal expansion and mismatch especially when using the thinner tapes. ![]() Therefore stress on the bond line should be minimized by avoid direct loading on the tape. Remember the narrower the tape width, the quicker the heat will build up under the bond area which will reduce the holding capability of the tape during the process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |